The natural look of gravel, without the mess

Our amazing Resin Bound System will transform the look of your home, driveway, patio area, swimming poole surround and so much more. Our Resin Bound System is visually stunning, permeable, enviromentally friendly, low maintenance and is pushchair & wheelchair friendly due it its completely smooth finish.

Resin Bound Driveways & Paths

What is it? Resin Bound

The Resin Bound system consists of a smooth finish, laid approximately 15mm to 18mm thick, dependant on the nature of general use. The aggregate surfaces use a UV stable clear polyurethane resin to bind together a mixture of aggregates to give a flat surface with a natural colour and good structural strength.

Resin Bound Surfacing

How is it applied? How is it used?

The resin is mixed with its curing agent, the resin mixture is then poured across the clean dry surface and spread out with a serrated trowel. The chosen aggregate is scattered into the resin and left to set. When the resin has hardened, the excess aggregate is swept off.

Resin Bond can be used to give an extremely durable aggregate coating to paths, patios and garden areas. It can also be used to coat wood or metal for attractive non slip finishes to stairs, decking, footbridges and disabled access ramps.

Resin Bonded Driveways & Paths

What is it? Resin Bonded

Resin Bonded uses a polyurethane resin to bind the aggregate to a hard surface. A coat of resin is applied to the substrate and then scattered with the stone so that the resin is completely covered. Looses stone is then removed, leaving a durable rough finish. The final surface has the appearance of loose stones and is extremely durable.

Resin Bonded Surfacing

How is it applied? How is it used?

The resin is thoroughly mixed with a curing agent inside a mixer, this resin mixture is then added to the pre weighed mixture of aggregates.
Resin Bound finishes are applied to sound clean, dry tarmac, asphalt or concrete surfaces.
Our Resin Bound System can be used to give an extremely durable aggregate finish to paths, drives, car parks and many other areas.
Factors affecting choice are colour, hardness and texture.
We can advise you on all of our products and which is best suited to your needs.

We operate throughout Dorset, including Bournemouth, Poole, Christchurch and Weymouth and Dorchester

ASCB Forum of Private Business Business Assesment Service Guild of Master Craftsman
 
 
Abakon Resin Driveways
13 Springfield Crescent,
Poole, Dorset, BH14 0LL
 
 

Website Design by Radikls
Copyright 2015